Philco 7M31B - Software Upgrade

Skyworth RGB R&D Centre Technical Document
39
/
60
5. Software Upgrade
Copy the new software (named by “MstarUpgrade.bin”) to the root directory of USB driv
e. Plug the drive to the USB socket, enter MENU->FUNCTION->Software Update(USB), p
ress “ ENTER/OK” button to begin update. TV set will restart when finish. Note, you nee
d to restart the TV set again by AC power.
NOTE: Some other settings not mentioned above are only used for software engineer, t
hey are ready by software according to different panels and markets and usually should
not be changed.