Philco PHAF 5000 - Using the Appliance

Copyright © 2019, Fast ČR, a. s. Revision 07/2019
EN - 7
Auto Functions
Press the

button to select from the following auto programs:
Mode Pre-set temperature in °C Pre-set time in min.
Preheating P 200 3
French fries
200 22
Prawns
160 8
Meat
200 25
Poultry
180 20
Fish
200 10
Steak
200 12
Baked with cheese
170 3
Bacon
200 10
NOTE:
• Theseshallbeconsideredasguidevalues.Dependingonthesizeandweight,thetimeandtemperaturemaybelongerandhigherorshorterandlower.
• Youmay,however,changethepre-settemperatureandtimeoftheautofunctions.ThisisnotpossiblewhileusingtheautomaticprogramP!
USING THE APPLIANCE
1. Connect the appliance to a properly installed earthed socket.
NOTE:
 Youwillhearabeepsoundandallsymbolslightupbriey.The button lights red.
2. Press the buttontoswitchtheapplianceon.Youwillseethepre-adjustment190°Cand3minutes.
3. Select an auto function by using the

buttonorsetthetime(1-60minutes)andthetemperature(80°C-200°C)individuallybyusingthebuttons+ and -.
NOTE:
 YoumayuseprogramP for preheating.
4. Press  the button to start the cooking process.
NOTE:
• Oncethepre-settemperatureisreached,the

symbol will light green.
• Thesymbolisswitchingbetweenthecoloursredandgreen.Thisisnormalanditindicatesthatthetemperatureiscontrolledbythethermostatandisbeing
maintained.
5. Using the handle, pull the fat tank with the basket from the appliance.
6. Fill the basket with the desired food.
7. Slide the fat tank with the basket back into the appliance.
It must engage.
8. If necessary, shake the food after half the cooking time.
Pull it out of the fat tank with the basket on the handle.
WARNING:
• Hotsteamcanescape!
• Nevershakethebasketwhenitisinthefattank,becausethismaycontainhotoil.
9. Place the fat tank with basket on a heat-resistant surface.
10. Slide the cover of the release button towards the basket.
11. Press the release button to remove the basket. Shake the contents of the basket.
12. Put the basket back in the fat tank. This must engage.
13. Slide the fat tank back into the appliance.
Pause Operation
• Pressthe button to pause the operation. The  button is ashing. Press the  button again to resume the operation. The  button is continuously lit
again.
• Theoperationwillalsobepausedassoonasyouremovethebasket.Inordertoturntheappliancebackon,insertthebasketagain.
NOTE:
• Theappliancewillstartfromthespotithasbeenpaused.
• If,however,youpulloutthepowerplug,yourcurrentsettingswillbelost.Wheninsertingthepowerplugandpressingthe button the appliance will show the
pre-adjustment again.
End of Operation
1. After the time has elapsed, the appliance will automatically switch into standby mode. After approx. 20 seconds, you will hear 5 beep sounds and the

symbol
goes o.
2. Pull out the fat tank with the basket by the handle.
3. Place the fat tank with basket on a heat-resistant surface.
4. Slide the cover of the release button towards the basket.
5. Press the release button to remove the basket. Put the food in a heatproof bowl.
6. Slide the fat tank back into the appliance.