What does E01 error mean on a Philco PLCE06GGPWT?
The E01 error on your Philco Washer indicates that the machine door is left open. Close the machine door. If your machine persists to indicate fault, turn off your machine, unplug it and contact the nearest authorised service immediately.
What does E02 error mean on a Philco PLCE06GGPWT?
The E02 error on your Philco Washer indicates that the pump is faulty or pump filter is clogged or electrical connection of the pump is faulty. Turn on the faucet. Mains water may be cut-off. If the problem still continues, your machine will stop after a while automatically. Unplug the machine, turn off your faucet and contact the nearest authorised service.
What does E03 error mean on a Philco PLCE06GGPWT?
The E03 error on your Philco Washer indicates that the water pressure or the water level inside the machine is low. Clean the pump filter. If the problem persists, contact the nearest authorised service.
What does E04 error mean on a Philco Washer?
The E04 error on your Philco Washer indicates that your machine has an excessive amount of water. Your machine will discharge water by itself. Pursuant to discharging operation, turn off your machine and unplug it. Turn off your faucet and contact the nearest authorised service.
Essential instructions for domestic use and warranty considerations.
Critical warnings to protect users from hazards like burns, electric shock, and falls.
Key technical data including voltage, current, power, capacity, and dimensions.
Step-by-step guide to remove safety screws before first use.
Instructions for leveling the machine using adjustable feet for stability.
Guidance on safely connecting the washing machine to the power supply.
Procedures for connecting the water supply hoses to the machine.
Instructions for properly connecting the drain hose to dispose of water.
Explanation of additional functions like delay start, rapid wash, and anti-allergic.
Instructions on how to locate, clean, and maintain water inlet filters.
Step-by-step guide to cleaning the pump filter to ensure proper drainage.
Solutions for common issues like the machine not starting or not taking in water.
Troubleshooting steps for problems with water discharge and excessive vibration.
Addressing issues like excessive foam and poor washing outcomes.
Resolving problems with water discharge, residue on clothes, and grey spots.
Explains common error codes (E01-E04) and the steps to resolve them.
To Next Page
General
