EN - 9
03/2011
Copyright © 2011, Fast ČR, a. s.
PART 4: SETTING THE TEMPERATURE
Set the temperature in the refrigerator using the thermostat control knob. The thermostat control module
is connected to the compressor. Turn the thermostat control knob upwards or downwards and set the
temperature inside the refrigerator. Temperature set to the value "1" is the warmest, and the temperature set
to "6" is the coldest.
The value "OFF" means that the refrigerator is o .
Set the position from 1 to 6 for normal use. If you are not sure about the temperature, set it to 3.
The temperature needs to be set based on:
• Temperature in the room where the appliance is located;
• Amount of food stored;
• Number of times the appliance is opened.
We recommend the middle settings. Soon you will nd out the optimal setting for your requirements.
A correct temperature setting is important for storing food. Food spoils very quickly because of micro-
organisms, which is possible to prevent or delay by the use of a correct storage temperature. Temperature
a ects the growth rate of the micro-organisms. These process are slowed down by a declining temperature.
For this reason we recommend the middle settings of the thermostat control knob.
To Next Page
Loading...
