Caution: Never put the motor unit or the adapter in water or in a
dishwasher, as this causes permanent damage to these parts.
Cleanable parts
Clean the following parts before (first) use and after each subsequent use:
Breast pump parts:
-
Silicone diaphragm
-
Pump body
-
Massage cushion
-
White valve
-
Cover
Bottle parts:
-
Philips Avent Natural bottle
-
Dome cap
-
Screw ring
-
Nipple
-
Sealing disc
Supplies needed for cleaning:
Washing in sink
Washing in dishwasher
-
Mild washing-up liquid
-
Mild washing-up liquid/tablet
-
High quality drinking water
-
High quality drinking water
-
Soft brush or clean dish towel
-
Clean sink or bowl
Warning: Do not use antibacterial or abrasive cleaning agents
when you are cleaning.
1 Disassemble the breast pump and bottle completely. Also remove the
white valve from the breast pump.
Caution: Be careful when you remove the white valve and when you
clean it. If it gets damaged, your breast pump does not function
properly. To remove the white valve, gently pull at the ribbed tab on
the side of the valve.
2 Wash the parts in the sink or dishwasher.
Washing in sink: Soak all separated parts for 5 minutes in hot water with
some mild washing-up liquid. Clean all parts with a soft brush or clean
dish towel and then rinse them thoroughly.
Washing in dishwasher: Clean the parts, except the motor unit, the
silicone tube and cap and the adapter, in the dishwasher (on the top rack
only).
11
English
To Next Page
Loading...
