2 Insert the white valve into the pump body from underneath. Push the
valve in as far as possible.
3 Screw the pump body clockwise onto the bottle until it is securely fixed.
4 Insert the silicone diaphragm into the pump body from above. Make sure
it fits securely around the rim by pressing down with your fingers to
ensure a perfect seal.
5 Insert the massage cushion into the funnel-shaped section of the pump
body.
6 Push in the inner part of the massage cushion as far as possible and
make sure that it is perfectly sealed all around the rim of the pump body.
13
English
To Next Page
Loading...
