6
How to Use the Controls
PINCUSHION
PINCUSHION
PINCUSHION IS to correct the pincushion distortion of the on-screen image.
Note: Use this feature only when the picture is not square.
2
2
Press the “ ”
Pincushion key pad button.
3
3
Press the“ ”or“ ” button
to adjust Pincushion.
1
1
RESET
RESET
RESET IS to recall orginal factory preset modes.
Use this feature only when you want to return all your changes back to their orginal settings.
2
2
Press the “ ” Reset key pad button
to recall the factory settings.
1
1
Press the “ ”+“ ” Shift key pad
button at the same time, and wait two
seconds, while “Shift” LED is on,control is
on the second level.
Press the “ ”+“ ” Shift key pad
button at the same time, and wait two
seconds, while “Shift” LED is on,control is
on the second level.
To Next Page
Loading...
