Need help?Do you have a question about the Philips 107B and is the answer not in the manual?
CRT Specifications| Size | 17"/41 cm |
|---|---|
| Deflection angle | 90° |
| Dot pitch | 0.25 mm |
| Horizontal pitch | 0.21 mm |
Display Area| Recommended display area (mm) | 306 x 230 mm |
|---|---|
| Recommended display area (inch) | 12.0" x 9.0" |
| Maximum display area (mm) | 327 x 245 mm |
| Maximum display area (inch) | 12.9" x 9.7" |
Scanning| Horizontal scanning | 30 - 92kHz |
|---|---|
| Vertical scanning | 50 - 160Hz |
| Video dot rate | 234MHz |
Video| Video input impedance | 75Ω |
|---|---|
| Sync input impedance | 2.2kΩ |
| Input signal levels | 0.7 Vp-p |
Resolution and Modes| Max resolution | 1920 x 1440 |
|---|---|
| Recommended resolution | 1024 x 768 |
| User definable modes | 16 |
Power Management| Operation power consumption | 90 W |
|---|---|
| Suspend/Stand-By Mode power consumption | < 10 W |
| Off mode/Deep Sleep power consumption | < 2.3 W |
Physical Specifications| Dimensions including base (mm) | 399 x 410 x 408 |
|---|---|
| Dimensions excluding base (mm) | 399 x 373 x 408 |
| Unit weight | 15.0 kg |
Operating Environment| Operational temperature | 0°C to +40°C |
|---|---|
| Storage temperature | -25°C to +65°C |
| Relative humidity | 5% to 95% |
To Next Page
