highlighted. Press MENU to confirm.
5) To adjust the pincushion, press the (+) or (-) button, press the MENU to confirm.
6) When the pincushion is adjusted, press the (-) button to highlight BALANCED. Press MENU
to confirm.
7) To adjust the balanced pincushion, press the (-) or (+) button.Press MENU to confirm.
8) When the balanced pincushion is adjusted, press the MENU button to return to the ADJUST
SHAPE window. BACK TO MAIN WINDOWS will be highlighted.
9) Press the MENU button to return to the MAIN CONTROLS window, or press the (-)button
until ADJUST SIDE ANGLES is highlighted.
ADJUST SIDE ANGLES
ADJUST SIDE ANGLES under ADJUST SHAPE allows you to adjust two of the five preset
options. These two options are TRAPEZOID and PARALLELOGRAM. Note: use these features
only when the picture is not square.
1) Press the MENU button on the monitor. The MAIN CONTROLS window appears.
2) Press the (+)button until ADJUST SHAPE is highlighted.
4) Press the MENU button. The SIDE CURVE window appears. PINCUSHION should be
To Next Page
Loading...
