45
Meridian 3
1. Rename the EDID data to “wa”, “wd”.
2. Put the “wa” and “wd” into a new folder, and then create another new folder named “ddc” (It must be “ddc” instead
of other names).
Step1: Must put the “ddc” folder and “TPVDDC6.0.exe” into the same folder.
Step2: Must copy the folder which contains EDID data and “config” to “ddc” folder.
3. Double-click
, and choose the “Analog and DVI”, it will show the picture as follow:
To Next Page
Loading...
