Philips 196V3LSB2/00 - Vga Display Identification; DVI Display Identification; Usb Support; DDC;CI Support and Smart Manage;Control

!
88
Meridian 3
Power saving mode to Normal: 3.8s(typ.)
Note 2 :
Measurement power Saving.
˸˴˸˸ʳ˹ʳ
˸ʳ˴˼˺ˁ˷˹
ˣ˸ʳ˶˼ʳ
˸˴˸ʳ˻˸ʳ˴ʳˀ˃ˌ˃
VGA Display identification
In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability
DVI Display identification
In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0)
use DDC-2B, DDC/CI, and EDID V1.3
USB support
Connect the upstream port of the monitor to host PC’s USB port via USB cable. Then attach
external devic
e to the downstream port of the monitor. Check if the device can work properly.
DDC /CI Support and Smart Manage/Control
In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable with ,
Philps SmartManage, SmartControl V6.1, and Protrait Display Tune at least.
Pivot function(Auto pivot)
It needs to support AUTO PIVOT function with SmartControl PC application tool.
Hot-key definition
˗ˍ˯˘ˡ˚˯˼ʳ


˽
˸˶˯

˸˶˯˛ˋ˯˻ʳ
˾
Smart image
˦˴ʳ˜˴˺˸ˁ˷˶
PerfectTune II (formerly FGA, FACTORY GAMMA Alignment)
A. PerfectTune must be done after warming 30 minutes at least.
B. PerfectTune must be performed after Auto Color.
C. PerfectTune must be conducted through DVI or scaler embedded patterns.
D. Delta E < 2.5
audio
3.17.1 Frequency Response
The amplifier and speaker combination shall provide a frequency response of 300 Hz to
20 kHz, with +/- 3 dB variation over the entire response range.