Philips 196V3LSB2/00 - Timing Requirement; Osd;Keypad Functions

!
86
Meridian 3
Timing requirement
Factory Preset mode definition:
1. Perfect FOS while presenting those timings.
2. Will specify those timing in User's Manual
Preset mode definition:
1. Need to support those timings.
2. Perfect FOS after auto adjustment.
User mode
1. Can save those timing that not in Preset mode and can be showed (not over
scaler or
Panel spec.)
2. It needs to reserve the 10 timings space in memory size.
Mode storing capacity
Factory preset modes : Refer to Timing table
preset modes : Refer to Timing table
User modes : Refer to Timing table
Timing pixel clock over H/W limitation do not support.
1. Factory preset modes and preset modes are defined in the enclosed timing table file
07LPLQJ
WDEOHB[O
OSD/Keypad functions
ITEM
1 OSD/keypad definition
ˠˆʳˠ˜˖ˢˡʳ
˦ˣ˘˖˲˅˃˄˄˃ˇ˃ˉˁ˷˶
Reset -
No: Exit
Yes: Auto adjustment for
displaying timing mode
and recall factory preset
2 OSD Translation
ˢ˦˗˲˦˼˺˲ˠˆ˲˅˃˄
˄˃ˆ˅˅ˁ˿
English, French, German,
Spanish, Italian, Russian,
Simplified Chinese,
Portuguese, Turkish (9)
3 Power On logo
ˣ˻˼˿˼˲˟˺˲˄ˌ˅˃
˄˃ˋ˃ˁ˵
Power On Logo: Power On
Æ Show up Philips logo 3
seconds
Æ Change to input signal.
This picture is reference
only. The official drawing
will send out by PM.