ʳ
ʳ
50
Meridian 3
1. Rename the EDID data to “wa”, “wd”.
2. Put the “wa” and “wd” into a new folder, and then create another new folder named “ddc” (It must be “ddc”
instead of other names).
Step1: Must put the “ddc” folder and “TPVDDC6.0.exe” into the same folder.
Step2: Must copy the folder which contains EDID data and “config” to “ddc” folder.
3. Double-click , and click the “LoadFile”, it will show the picture as follow:
Select AnalogǃHDMI option(For 231B4LPYCS)
Select AnalogǃDig option(For 231B4LPYCB)
To Next Page
Loading...
