Philips 231B4LPYCB/75 - Scanning Frequencies

ʳ
ʳ
74
Meridian 3
View angle (CR=10) : =170 for Right/Left (Typ)
: =160 for Up/Down (Typ)
Contrast ratio : 1000:1 (Typ)
White luminance : 250(Typ.)
Color gamut : >=72%
Gate IC : N/A
Source IC : N/A
Response time : Tr + Tf <=5 ms (Typ)
Vertical frequency range : 50~75Hz
L & T
Type NR. : BM230WF3-SJC2
Resolution : 1920 x 1080 (WSXGA+)
Outside dimensions : 534.0(H) x 313.3(V) Typ. x 10.6(D) Max.
Pitch (mm) : 0.0883mm(RGB) x 0.265(V)mm
Color pixel arrangement : RGB vertical stripe
Display surface : Haze 25% Hard coating (3H)
Color depth : 16.7M (6 bit Hi-FRC)
Backlight : LED
Active area (W x H) : 509.184(H) x 286.416(V) mm
View angle (CR=10) : =178 for Right/Left (Typ)
: =178 for Up/Down (Typ)
Contrast ratio : 1000:1 (Typ)
White luminance : 250(Typ.)
Color gamut : >=72%
Gate IC : N/A
Source IC : N/A
Response time : Tr + Tf <=5 ms (Typ)
Vertical frequency range : 50~75Hz
2.2 Scanning frequencies
Hor. : 30 – 83 K Hz
Ver. : 56 - 76 Hz
Video dot rate: < 210 MHz for VGA and < 170 MHz for DVI, warning message must be
displayed while over 165 MHz (supplier to provide accurate scaler bandwidth number)
Power input: 90-264 V AC, 50/60 r 2 Hz
Power consumption:
On mode: :<58W (max.),
:31W (typ.) W/O USB,AUDIO
EPA 5.0 spec. : 25 Watt. (typ.)
SmartImage ECO mode: : 50% Max power consumption
Functions:
(1) D-SUB analog R/G/B separate inputs, H/V sync separated, Composite (H+V) TTL level,
(2) SOG sync : a. Sync select: H + V
b. Sync select: SERR
(3) DVI digital Panel Link TMDS inputs, HDCP supported.