11EN
English
To switch on
If the standby indicator is off, press
POWER at the side of the monitor.
If the standby indicator is red, press
(Standby-On) on the remote control.
To switch to standby
Press (Standby-On) on the remote
control.
» The standby indicator switches to red.
To switch off
Press POWER at the side of the
monitor.
» The standby indicator switches off.
Tip
Though your monitor consumes very little
power when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the monitor power
cable from the power outlet.
Note
If you cannot locate your remote control and
want to switch on the monitor from standby,
press POWER at the side of the monitor.
5 Start to use
This section helps you perform basic monitor
operations.
Switch your monitor on/off
or to standby
To Next Page
Loading...
