Q10: Are Philips LCD monitors Plug-and-
Play?
Ans.: Yes, the monitors are Plug-and-Play
compatible with Windows 8/7/Vista/XP/
NT, Mac OSX, Linux
Q11: What is Image Sticking, or Image Burn-
in, or After Image, or Ghost Image in
LCD panels?
Ans.: Uninterrupted display of still or static
images over an extended period
may cause "burn in", also known as
"after-imaging" or "ghost imaging", on
your screen. "Burn-in", "after-imaging",
or "ghost imaging" is a well-known
phenomenon in LCD panel technology.
In most cases, the "burned in" or
"atter-imaging" or "ghost imaging" will
disappear gradually over a period of
time after the power has been switched
off.
Always activate a moving screen saver
program when you leave your monitor
unattended.
Always activate a periodic screen
refresh application if your LCD monitor
will display unchanging static content.
Warning
Failure to activate a screensaver, or a periodic
screen refresh application may result in severe
“burn-in” or “after-image” or “ghost image”
symptoms that will not disappear and cannot be
repaired. The damage mentioned above is not
covered under your warranty.
Q12: Why is my Display not showing
sharp text, and is displaying jagged
characters?
Ans.: Your LCD monitor works best at its
native resolution of 1920 x 1080 @
60 Hz. For best display, please use this
resolution.
8.4 Miracast FAQs
Q1: My device doesn’t have Miracast; can
I mirror the content on this Philips
display?
Ans.: This Philips display receives the signal via
Wi-Fi certified Miracast technology. To
enjoy this Miracast function, your source
device has to be certified for Miracast.
Q2: My devices are with Android 4.2.2
Operating System, why can I not
mirror my device on the Philips
display?
Ans.: This Philips display is Wi-Fi CERTIFIED
Miracast™. The source device must be
Android 4.2.2 or greater to support
Miracast function; however, in case your
source device does not connect or
work correctly, check with your device
FAQ or vendor directly for direction.
Note that this is not a fault of this
Philips display.
Q3: Do I need any cables to enable the
Miracast on this Philips display?
Ans.: No, to enable the Miracast function, it
does not require cables to mirror your
source device contents to this Philips
display.
Q4: Do I have to connect to Wi-Fi to
activate Miracast?
Ans.: No, without a Wi-Fi connection, you are
able to enjoy Miracast on this Philips
display.
To Next Page
Loading...
