Philips 243B1 - Connecting the Monitor to PC; USB C Driver Installation

6
2. Setting up the monitor
Connecting to your PC
1 2
1
2
Fast Charger
RJ45
USB docking
USB C-C
USB C-A
OR
USB C
USB
6
5 7 8
9
10
11
43
DP OUTDP
DP
1
Power Switch
2
AC power input
3
HDMI input
4
Displayport input
5
USB C
6
RJ-45 input
7
Displayport output
8
Audio output
9
USB downstream
10
USB downstream/USB fast charger
11
Kensington anti-theft lock
Connect to PC
1. Connect the power cord to the back of
the monitor firmly.
2. Turn off your computer and unplug its
power cable.
3. Connect the monitor signal cable to
the video connector on the back of
your computer.
4. Plug the power cord of your computer
and your monitor into a nearby outlet.
5. Turn on your computer and monitor.
If the monitor displays an image,
installation is complete.
USB C driver installation for RJ45
Before using the USB C docking display,
please ensure to install the USB C driver.
You can find the “LAN Drivers” from CD
disk if bundled or go to Philips website
support page to download the driver.
Please follow the steps for the installation:
1. Install the LAN driver that matches
your system.
2. Double click driver to install, and
follow Window’s instructions to
proceed with installation.