Philips 24E1N5300AE - Monitor Setup and Operation; 2.1 Installation and Base Setup

5
2. Setting up the
monitor
2.1 Installation
1
Package contents
*DP *HDMI
AC/DC Adapter
*USB C-C/A
*USB C-C
*USB C-A
5000 Series
Monitor
Quick start
Register your product and get support at www.philips.com/welcome
24E1N5300HE
24E1N5300AE
*Dierent according to region
Note
Use only AC/DC adapter model: Philips
ADPC20120.
2
Install the base
1. Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
24E1N5300AE
24E1N5300HE
2. Hold the stand with both hands.
(1) Gently attach the base to the
stand.
(2) Use your ngers to tighten the
screw located at the bottom of
the base.
(3) Use a screwdriver to tighten the
screw located at the bottom of
the base, and secure the base to
the stand tightly.
(4) Gently attach the stand to the
VESA mount area until the latch
locks the stand.
24E1N5300AE
24E1N5300HE
1
2
3
4
1
2
3
4
Caution
Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.