Philips 24E2N1100 - 6� Power Management

19
6. Power Management
If you have VESA DPM compliance
display card or software installed in
your PC, the monitor can automatically
reduce its power consumption when
not in use. If an input from a keyboard,
mouse or other input device is detected,
the monitor will 'wake up' automatically.
The following table shows the power
consumption and signaling of this
automatic power saving feature:
24E2N1100:
Power Management Denition
VESA
Mode
Video H-sync V-sync
Power
Used
LED
Color
Active ON Yes Yes
17.7 W
(typ.)
20.1 W
(max.)
White
Sleep
(Standby
mode)
OFF No No 0.5 W
White
(blink)
O
mode
OFF - - 0.3 W OFF
24E2N1100L:
Power Management Denition
VESA
Mode
Video H-sync V-sync
Power
Used
LED
Color
Active ON Yes Yes
18.3 W
(typ.)
24.9 W
(max.)
White
Sleep
(Standby
mode)
OFF No No 0.5 W
White
(blink)
O
mode
OFF - - 0.3 W OFF
24E2N1100B/24E2N1101B:
Power Management Denition
VESA
Mode
Video H-sync V-sync
Power
Used
LED
Color
Active ON Yes Yes
15.2 W
(typ.)
19.9 W
(max.)
White
Sleep
(Standby
mode)
OFF No No 0.5 W
White
(blink)
O
mode
OFF - - 0.3 W OFF
24E2N1100LB:
Power Management Denition
VESA
Mode
Video H-sync V-sync
Power
Used
LED
Color
Active ON Yes Yes
16.5 W
(typ.)
18.3 W
(max.)
White
Sleep
(Standby
mode)
OFF No No 0.5 W
White
(blink)
O
mode
OFF - - 0.3 W OFF
The following setup is used to measure
power consumption on this monitor.
• Native resolution: 1920 x 1080
• Contrast: 50%
• Brightness: 90%
• Color temperature: 6500k with full
white pattern
Note
This data is subject to change without
notice.