Philips 24E2N1100 - Vga Input; Operating the Monitor

6
3
Connecting to your PC
23
4
1
China Only
Worldwide
23
4
1
1
AC/DC power input
2
VGA
input
3
HDMI input
4
Kensington anti-theft lock
Connect to PC
1. Connect the power cord to the back
of the monitor rmly.
2. Turn o your computer and unplug
its power cable.
3. Connect the monitor signal cable to
the video connector on the back of
your computer.
4. Plug the power cord of your
computer and your monitor into a
nearby outlet.
5. Turn on your computer and monitor.
If the monitor displays an image,
installation is complete.
2.2 Operating the monitor
1
Description of the control buttons
7
6
25
4
3
1
Switch monitor’s power ON
and OFF.
Access the OSD menu .
Conrm the OSD adjustment.
Adjust the OSD menu.
Adjust the brightness level.
Change the signal input
source.
Return to previous OSD level.
SmartImage. There are
multiple selections:
EasyRead, Oce, Photo,
Movie, Game, Economy,
LowBlue Mode, O.