5
2. Setting up the monitor
2.1 Installation
1
Package contents
*DP *HDMI
AC/DC Adapter
Screw
M4 x 4
VESA Bracket
*USB C-C *USB C-A
*USB C-C/A
Register your product and get support at www.philips.com/welcome
27E2F7903
Monitor
7000 Series
Quick Start
*Thunderbolt
TM
4
*Dierent according to region.
Note
Use only the AC/DC adapter model:
FSP180-AJBN3-T
2
Install the base
1. Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
2. Hold the stand with both hands.
(1) Gently attach the base to the
stand.
(2) Use your ngers to tighten the
screw located at the bottom of
the base.
(3) Gently attach the stand to the
VESA mount area until the latch
locks the stand.
3
1
2
3. After stand installation, hold the
stand with both hands, then lift the
monitor.
To Next Page
Loading...
