Philips 30PF9975/12 - Remote Control for Connected Equipment; Operating Peripherals with Remote; Direct Recording via EasyLink

20
Recorder or DVD with EasyLink
The recorder (VCR or DVD+RW) or DVD can
be operated with the remote control via the
Recorder or DVD menu on screen.
& Press the MENU key on the remote control.
é Select the Recorder or DVD menu with the
cursor up/down.
“ Press the cursor left/right, up/down to select
one of the recorder or DVD functions.
The key ® for recording can be operated in the TV
mode.
If your EasyLink recorder has the system standby
function, when you press the B key for 3 seconds,
both TV and the recorder are switched to standby.
Òp‡π † ® Ï
Rwd Play Stop Play Ffw Rec Eject
Recorder
Òp ‡ π † Ï
Prev. Play Stop Play Next Eject
DVD
Connect your computer
EXT 2
AUDIO
RECEIVER
EXT 5
EXT 1
EXT 4
EXT 3
CINEMA LINK
Y
Pb
Pr
R
L
AUDIO
NO
FUNCTION
AUDIO
OUT
CENTRE
IN
MAINS
ANTENNA
SERVICE
75
R
L
S•VIDEO
VIDEO
VGA
IN
AUDIO
L
R
1
2
& Connect one end of a VGA cable 1 to the video card
of the computer and the other end to the
VGA
connector at the bottom of the TV.
Fix the connectors firmly with the screws on the plug.
é In case of a Multimedia computer, connect the audio
cable 2 to the audio outputs of your Multimedia
computer and to the
AUDIO R (right) and L left) inputs
of the side panel.
The
VGA IN connector allows the following TV and
monitor display modes:
EDTV 640/720 x 480p
720 x 576p
HDTV 1920 x1080i
VGA 640 x 480 60 Hz
SVGA 800 x 600 56 Hz
XGA 1024 x 768 60 Hz
Note:
If possible, use the XGA1024x768@60Hz video mode to
obtain the best image quality for your LCD monitor.
2240.1 en 19-06-2003 13:57 Pagina 20