Philips 32BDL3550Q - Input;Output Terminals

32BDL3550Q
4
2.2. Input/Output Terminals
HDMI 1 IN HDMI 2 IN
PC LINE IN
DVI-I IN
AUDIO OUT
RJ45
3 4 5 6 87
15
14
13
12
11
10
9
1
2
USB
Service Port
IR-IN
IR-OUT
RS232
OUT
RS232
IN
MICRO SD
USB2.0
5V 500mA
1
AC IN
AC power input from the wall outlet.
2
MAIN POWER SWITCH
Switch the main power between On and O.
3
PC LINE IN
Audio input for VGA source (3.5mm stereo phone).
4
RJ-45 IN
LAN control function for the use of remote control signal
from control center.
5
DVI IN
DVI-I video input.
6
AUDIO OUT
Audio output to external AV device.
7
HDMI1 IN /
8
HDMI2 IN
HDMI video/audio input.
9
IR IN /
10
IR OUT
IR signal input / output for the loop-through function.
NOTES:
• This display’s remote control sensor will stop working
if the jack [IR IN] is connected.
• To remotely control your A/V device via this display,
refer to page 12 for IR Pass Through connection.
11
MICRO SD CARD
Insert a micro SD card.
12
USB SERVICE PORT
Connect USB storage device
for Android ADB Firmware
update.
NOTE:
Exclusively for updating rmware only.
13
USB 2.0 PORT
Connect your USB storage device.
14
RS232 IN /
15
RS232 OUT
RS232 network input / output for the loop-through
function.