Philips 32E1N3600LA/01 - Setting up the Monitor; Installation

5
2. Setting up the
monitor
2.1 Installation
1
Package contents
*DP *HDMI
*USB C-C/A
*USB C-C
*USB C-A
3000 Series
Monitor
Quick start
Register your product and get support at www.philips.com/welcome
32E1N3600LA
Power
*Dierent according to region
2
Install the base
1. In order to well protect this monitor
and avoid scratching or damaging of
the monitor, keep the monitor face
down in the cushion for the base
installation.
2. Hold the stand with both hands.
(1) Gently attach the base to the
stand.
(2) Use your ngers to tighten the
screw located at the bottom of
the base.
(3) Use a screwdriver to tighten the
screw located at the bottom of
the base, and secure the base to
the stand tightly.
(4) Gently attach the stand to the
VESA mount area until the latch
locks the stand.
4
2
3
1
3. After attaching the base, erect
the monitor with both hands on
holding the monitor together with
styrofoam rmly. Now you can pull
out the styrofoam. When you pull
out the styrofoam, do not squeeze
the panel to avoid broken panel.
1
2