Studio 32/39HFL2808D/12 Page | 16
If enabled will store changes to channels are made.
Power up of TV will be Standby mode or Last Status at moment of power down.
Install and Retune Menu Contents
Automatic Channel
Scan (Retune)
Displays automatic tuning options.
Digital Aerial: Searches and stores aerial DVB stations.
Digital Cable: Searches and stores cable DVB stations.
Analogue: Searches and stores analogue stations.
Digital Aerial & Analogue: Searches and stores aerial DVB and analogue stations.
Digital Cable & Analogue: Searches and stores cable DVB and analogue stations.
Manual Channel
This feature can be used for direct broadcast entry.
Network Channel
Searches for the linked channels in the broadcast system.
Analogue Fine Tune
You can use this setting for fine tuning analogue channels. This feature is not available if no
analogue channels are stored.
First Time
Installation
Deletes all stored channels and settings, resets TV to factory settings and starts first time
installation. You can follow the instructions in the Initial Installation section for more
information on this process.
Clear Service List
(*) Visible for Denmark, Sweden, Norway or Finland. Clear Service List and then press
OK. The following OSD will be displayed on the screen. Select YES and press OK to
continue or select NO and press OK button to cancel.
TV Menu Features and Functions
To Next Page
Loading...
