Philips 32HFL2808D/12 - Page 25

Studio 32/39HFL2808D/12 Page | 25
OSD Disable
[Disable All Menus]
Feature to hide menu items when the Remote Control Menu key is pressed.
• Disable All Menus
○ all menu icons are hidden.
• Disable Setup Menus
○ picture, sound, settings and media browser menu icons are displayed.
When [Hotel Mode] is set to Off, all TV menu items will be displayed (picture, sound,
settings, install and retune, channel list, media browser)
Teletext
[Off]
Feature to hide Teletext display.
• On to enable Teletext activation.
• Off to hide Teletext.
Copy To USB
<OK>
Feature to copy configuration and channel settings.
• Select [OK] to copy settings to a USB device (connected to side-I/O).
Copy From USB
<OK>
Feature to copy configuration and channel settings of a similar TV.
• Select [OK] to copy settings from a USB device (connected to side-I/O).
Wakeup Time Channel
[1]
Feature to set the channel to view when the TV wakes up.
• Use Digits button(s) to complete entry field.
All timers and events are not possible to set once all menus are hidden. (Already set
events must be cleared before hide all menus)
>>> OSD Disable

[Disable All Menus]
Wakeup Time Volume
[40]
Feature to set the wakeup time volume level.
Range values 0-63.
USB option
[On]
Feature to detect if a USB device is connected.
• On to enable USB device detection.
• Off to disable USB device detection.
When [Off] the Media Browser icon will be displayed but cannot be activated.
Fixed Pic. Mode
[Off]
Feature to hide picture menu icon.
• Off picture icon is displayed amongst all menu.
• On picture icon is hidden.
Digital Tuner
[On]
• Off mixture of analog and digital channels.
• On digital channels only.
Multiple RC support
[Off]
Feature to select a unique RC address (1 out of 4) // a.k.a. MultiRC
• Off feature is disabled.
• On feature is enabled and shows what RC is set.
Welcome Screen
[On]
Feature to show a welcome screen at startup.
• On a welcome screen is shown
• Off a welcome screen is hidden
NIT Update
[Disable]
Feature to retrieve channel table information:
• On Retrieve NIT information
• Disable Don’t use NIT table
High Security
[Off]
Feature to limit Hotel Mode menu access:
•
On
Access to Hotel Menu only by Hotel Setup Remote
• Off Access to the Hotel Menu also with standard TV RC
Reset to Default
Feature to reset all features to standard factory setting
Hotel TV Menu settings