CEC
This function allows you to operate the linked functions
between our brand devices with a HDMI-CEC feature and this
unit
connecting through an HDMI cable. You must connect this
unit to our brand HDMI-CEC devices and be sure it's HDMI-CEC
setting is also set to On.
1
Use H I to select CEC, then press OK.
CEC
CEC Control
Device Auto Power Off
TV Auto Power On
Audio Receiver
Device Lists
Connect
On
Off
Off
Off
Adjust Back
2
Use H I to select the item you want to adjust, then use J
K to adjust it.
Set the CEC Control to On or Off. The following additional
settings will be grayed out when you set them to Off.
CEC Control
Off Disables all HDMI-CEC.
On
Selects if you have connected an
external
device that is compatible
with the HDMI-CEC function.
You can set your connected HDMI-CEC device to turn off by
interlocking from this unit's power.
Device Auto
Power Off
Off
Your connected HDMI-CEC
device stays on even if the unit
goes into standby mode.
On
Your connected HDMI-CEC
device turns off automatically
when the unit goes into standby
mode.
This unit will turn on when the power on signal is sent from your
connected HDMI-CEC device.
TV Auto
Power On
Off
This unit stays in standby mode
even if you turn on your
connected HDMI-CEC device.
On
This unit turns on automatically
when you turn on your
connected HDMI-CEC device.
Audio receiver allows you to use CEC to output TV audio directly
to
a connected audio device, without the need for an additional
digital audio cable. Only HDMI 1 mode has the audio receiver
function.
Audio
Receiver
Off Disable HDMI-audio receiver.
On
You can output TV audio through
the HDMI cable solely, provided
both
the TV and device are HDMI-
audio receiver compliant.
Note(s)
●
Some set-top boxes are not compatible with CEC, this is not a
malfunction.
Device Lists
Show the device list menu.
1
Use H I to select Device Lists, then press OK to enter the
sub-menu.
Connect
Connect the selected HDMI-CEC device.
1
Use H I to
select Connect, then press OK to enter the sub-
menu.
Voice Guidance
Lets you configure Voice guide and its settings.
1
Use H I to select Voice Guidance, then press OK.
2
Use H I to select the item you want to adjust, then use J
K to adjust it.
Voice Guidance
Off To set Voice Guidance to Off
On To set Voice Guidance to On
Volume
High
Set voice guide volume based
on your preference
Middle
Low
Speed
Fast
Set voice guide speed based
on your preference
Normal
Slow
Pitch
High
Set voice guide pitch based on
your preference
Middle
Low
Video Description
Change from the main audio to the secondary audio stream
that contains video description and vice versa.
1
Use H I
to select Video Description, then use J K to select
the item.
Off To set Video Description to Off
On To set Video Description to On
E-sticker
E-sticker (Electronic Sticker) is displayed. E-sticker can be turned
off using procedure below.
1
Use H I to select E-sticker.
2
Use J K to select Off.
Off You can turn off E-sticker.
On E-sticker is displayed of the TV screen.
31 .English
Continued on next page.
Back to Contents
To Next Page
Loading...
