4-8 PL19.00-A_DC
3. How to Attach Adjunctive Equipment
There are no Cell Cushion, etc. attached on the new
Front Cabinet to be replaced with.
Apply adjunctive equipment such as Cell Cushion by
consulting the following, then assemble the Front
Cabinet.
1. Cell Cushion (Top side)
Attach the Cell Cushion on the top side of the
Front Cabinet.
2. Cell Cushion (Left/ Right)
Attach the Cell Cushion on the left and right side of
the Front Cabinet.
CAUTION #
When turning over, do not twist the LCD panel
before tightening all screws on the front cabinet.
A Cell Cushion is pasted onto rib which starts at blue line.
Either it starts on left or right no problem.
Pasting error +/- 2mm
A cushion also need to paste following concave area shape.
Exceed Front Cabinet edge is NG
A Cell Cushion is pasted onto rib which starts at blue line.
Either it starts on left or right no problem.
Pasting error +/- 2mm
A cushion also need to paste following concave area shape.
Exceed Front Cabinet edge is NG
A Cell Cushion is pasted onto rib
which starts at blue line.
Either pasting starts from top
or bottom is no problem.
Pasting error +/- 2mm
A cushion also need to align
following concave area shape.
Exceed Front Cabinet edge is NG
A Cell Cushion is pasted onto rib
which starts at blue line.
Either pasting starts from top
or bottom is no problem.
Pasting error +/- 2mm
A cushion also need to align
following concave area shape.
Exceed Front Cabinet edge is NG
A
A
A
To Next Page
Loading...
