Dig. camera
To view pictures on your digital camera,
connect it to the USB connection at the side
of the TV and switch it on. If the content of
your camera does not appear automatically,
you may need to enable Picture Transfer
Protocol (PTP) on the camera. Refer to the
camera's user manual for instructions.
Dig. camcorder
The most practical connection for a camcorder is at the side of the TV.
If you cannot use the side connector, use an HDMI or the EXT2 (YPbPr and Audio L/R) cable to
connect the camcorder to the back of the TV.
To Next Page
Loading...
