To Next Page

To Previous Page

Connections

5.1

Connectivity guide

Always connect a device to the TV with the highest

quality connection available. Also, use good quality

cables to ensure a good transfer of picture and

sound.

When you connect a device, the TV recognizes its

type and gives each device a correct type name. You

can change the type name if you wish. If a correct

type name for a device is set, the TV automatically

switches to the ideal TV settings when you switch to

this device in the Sources menu.

5.2

Antenna (4503, 5503, 4304,

4354, 4504, 5304, 5605-32"

series TV)

Insert the antenna plug firmly into

the Antenna socket at the back of the TV.

You can connect your own antenna or an antenna

signal from an antenna distribution system. Use an

IEC Coax 75 Ohm RF antenna connector.

Use this antenna connection for DVB-T and DVB-C

input signals.

For 32" or above

For 22"/24"

* Network port is only for UK models

** Satellite port is only for xxPxSxxxx series

5.3

Antenna (5505, 5525, 5535,

5605-24" series TV)