Philips 37PF9631D/37B - Audio and Recording; Connecting Digital Surround Receiver; Recording TV Programs; Selecting Connected Equipment

English
User Manual
45
Connect a Digital Surround receiver
< Connect a Digital Multichannel Surround
receiver to the
DIGITAL AUDIO OUT
connector at the bottom of the TV.
L
R
VIDEO
DIGITAL
AUDIO OUT
AV3
S-VIDEO
Record a TV program
You can record a TV program using your recorders tuner
without affecting your TV.
1. Select the channel number on your recorder.
2. Set your recorder to record.
See the handbook for your recorder.
Note: when recording analog programs, switching channel
numbers on your TV does not disturb recording !
Record with your recorder
DIGITAL
AUDIO
OUT
Before operating your connected equipment you have to make
a selection in the Setup menu, Select your source,p.20.
1. Press the AV+ button repeatedly or select Source in the
Setup menu (see p. 20) to select
AV1, AV2, AV3, HDMI,
Side or TV, according to where you connected your
devices.
2. Press the cursor up/down.
3. Press
OK.
789
0
AV+
-
INFO
REC
ON/OFF MODE
VIEW
- FAVORITES -
✓
Ambilight
AV+
Select connected equipment
Note: Due to legal requirements, it is possible
that with certain copy protected PCM audio
qualities from a peripheral device connected to
the
HDMI
input, the Digital audio output signal is
muted