Philips 37PFL5603D/10 User Manual

Use dual screen teletext
The section “Use dual screen teletext” in this
user manual instructs you to press
Dual
screen to display normal teletext when dual
screen teletext is enabled.
After updating the TV software (to version
64.67.3 or higher),
Dual screen can no
longer be used to display normal teletext.
Use the following instructions in place of the
original instructions:
1 Press Dual screen on your remote
control to enable dual screen teletext.
2 Press Dual screen again to exit
teletext.
1 Addendum
Enlarge teletext pages
The section “Enlarge teletext pages” in this
user manual instructs you to press OPTION
to enlarge teletext pages.
After updating the TV software (to version
64.67.3 or higher), OPTION can no longer be
used to enlarge teletext pages.
Use the following instructions in place of the
original instructions to enlarge teletext pages:
1 Press TELETEXT and select a teletext
page.
2 Press (Picture format) to enlarge the
top part of the page.
3 Press (Picture format) again to view
the enlarged lower part of the page.
4 Press to scroll through the enlarged
page.
5 Press (Picture format) again to return
to the normal page size.

Philips 37PFL5603D/10 Specifications

General

Screen Size	37 inches
Resolution	1920 x 1080 pixels
Display Type	LCD
Backlight Type	CCFL
HDMI Ports	3
USB Ports	1
Brightness	500 cd/m²
Audio Output	2 x 10 W
Aspect Ratio	16:9
Response Time	8 ms
Comb filter	3D
Component video (YPbPr/YCbCr) in	1
SCART ports quantity	2
S-Video inputs quantity	1
PC in (D-Sub)	1
Audio (L/R) in	1
Audio (L/R) out	1
Headphone outputs	1
Digital audio coaxial out	1
RMS rated power	20 W
Equalizer	Yes
Teletext function	Yes
Teletext	1000 pages
Weight	18.5 kg
Power consumption (typical)	150 W
Power consumption (standby)	0.15 W
Built-in Tuner	Yes
HD type	Full HD
Dynamic contrast ratio marketing name	Dynamic Contrast
Viewing Angle, Horizontal	176 °
Viewing Angle, Vertical	176 °
Supported video modes	1080i, 720p
Width (with stand)	92.5 cm
Width (without stand)	92.5 cm