Mechanical Instructions
EN 20 TPN10.1E LA4.
2013-Oct-18
back to
div. table
Figure 4-9 Rear cover removal [2]
4.3.2 Speakers
Refer toFigure 4-9
and Figure 4-10 for details.
1. Remove fixation screws [1] that secure the speakers cover,
Refer to Figure 4-9
for details.
2. Gently lift the speakers cover from the TV. Make sure that
wires and cables are not damaged while lifting the rear
cover from the set.
3. Remove the fixation screws [1] that secure the speakers.
Refer to Figure 4-10
for details.
4. Gently take the cable [2] out from the snap. Then gently
unplug the connectors [3] from the SSB + PSU combination
panel. Refer to Figure 4-10
for details.
5. Gently take the speakers out.
When defective, replace the whole unit.
19530_108_130723.eps
130723
Q3 × 8
1
1
1
To Next Page
Loading...
