EN
48
Connect a PC
4848
Notes:
- only a PC with digital sound can be connected to the HDMI connection;
- if your PC does not have digital sound output, connect your PC via a VGA connector;
- before connecting your PC to the TV, select your PC monitor settings to a refresh frequency of
60 Hz;
- supported PC monitor modes:
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
PC equipped with a DVI connector:
1. Use a DVI to HDMI cable to connect to one of
the
HDMI connectors of your TV 1.
2. Connect the audio cable 2 to the
DIGITAL
AUDIO IN
connector of the TV.
3. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 30, and link it to
HDMI 1 or 2.
4. Also select DIGITAL AUDIO IN in the same
Connections menu.
PC equipped with a VGA connector:
1. Use a VGA to RGB H/V cable 1 to connect
to the
RGB H/V connectors of your TV.
2. Connect the audio cable 2 to the
AUDIO R
(right) and L (left) inputs of the TV.
3. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 30.
To Next Page
Loading...
