Do you have a question about the Philips 42PFL6008K/12 and is the answer not in the manual?
Details on product support and information via CTN links in Table 2-1.
Overview of side and rear connections with numbered ports.
Safety regulations and procedures for repair and post-repair checks.
Explanation of Service Default Mode (SDM) and Service Alignment Mode (SAM).
Introduction to error codes, buffer management, and logging.
Procedure for error indication via blinking LED (Layer 1 and Layer 2).
Software and hardware protections to prevent faults.
Description of power supply input, branches, and voltage regulators.
Step-by-step instructions for SSB replacement, including advises and remarks.
Conditions and procedure for automatic software upgrade.
Conditions for performing electrical adjustments: voltage, warm-up, probe.
Procedure for white point alignment using LCD screens or color analyzer.
Procedure to reset the NVM on a repaired SSB.
Description of the power supply unit and its components.
Overall system block diagram showing major components and connections.
Block diagram illustrating the power supply lines within the system.
Circuit diagrams and PWB layouts for the Amplifier panel.
Circuit diagrams and PWB layouts for Wireless LAN, USB, Sensor, IR/LED modules.
Details on product support and information via CTN links in Table 2-1.
Overview of side and rear connections with numbered ports.
Safety regulations and procedures for repair and post-repair checks.
Explanation of Service Default Mode (SDM) and Service Alignment Mode (SAM).
Introduction to error codes, buffer management, and logging.
Procedure for error indication via blinking LED (Layer 1 and Layer 2).
Software and hardware protections to prevent faults.
Description of power supply input, branches, and voltage regulators.
Step-by-step instructions for SSB replacement, including advises and remarks.
Conditions and procedure for automatic software upgrade.
Conditions for performing electrical adjustments: voltage, warm-up, probe.
Procedure for white point alignment using LCD screens or color analyzer.
Procedure to reset the NVM on a repaired SSB.
Description of the power supply unit and its components.
Overall system block diagram showing major components and connections.
Block diagram illustrating the power supply lines within the system.
Circuit diagrams and PWB layouts for the Amplifier panel.
Circuit diagrams and PWB layouts for Wireless LAN, USB, Sensor, IR/LED modules.
| Screen Size | 42 inches |
|---|---|
| Resolution | 1920 x 1080 pixels |
| Display Type | LED |
| Smart TV | Yes |
| HDMI Ports | 4 |
| USB Ports | 3 |
| Wi-Fi | Yes |
| Ethernet | Yes |
| Audio Output | 20 W |
| 3D | Yes |
| Ambilight | Yes |
| Refresh Rate | 400 Hz |
| Digital TV Tuner | DVB-T/C/S/S2 |












Loading...