To Next PageTo Next Page
Need help?Do you have a question about the Philips 42PFL6907T/12 and is the answer not in the manual?
General| Screen Size | 42 inches |
|---|---|
| Resolution | 1920 x 1080 pixels |
| Display Technology | LED |
| Smart TV | Yes |
| HDMI Ports | 4 |
| USB Ports | 3 |
| Wi-Fi | Yes |
| Ethernet Port | Yes |
| Screen Shape | Flat |
| 3D | No |
| Internet TV | Yes |
| Response Time | 2 ms |
| Contrast Ratio (Typical) | 5000:1 |
| Component Video (YPbPr/YCbCr) in | 1 |
| RMS Rated Power | 20 W |
| Sound Output | 2x 10W |
| Digital Signal Format System | DVB-C, DVB-S, DVB-S2, DVB-T |
| Motion Interpolation Technology | Perfect Motion Rate |
Provides detailed technical specifications and product information for on-line support.
Details on rear and side connector interfaces for various inputs and outputs.
Essential safety regulations and precautions required during and after repair.
Important warnings regarding electrostatic discharge (ESD) and high-voltage sections.
Step-by-step instructions for removing the rear cover and other components.
Overview of Service Default Mode (SDM), Service Alignment Mode (SAM), and Customer Service Mode (CSM).
Information about ComPair, a service tool for diagnostics and software updates.
Explanation of the error code buffer and how errors are logged and displayed.
Procedure for displaying errors via the front LED in CSM and SDM modes.
Details on software protections and error detection mechanisms.
Tips for fault finding, including Ambilight, CSM, and DC/DC converter checks.
Instructions for upgrading main and standby software via USB.
Conditions required for performing electrical adjustments.
Procedures for aligning white point, Ambilight, and TCON.
Instructions on setting microprocessor options and understanding option codes.
Procedure for resetting the NVM on a repaired SSB and setting identification data.
Description of the power supply unit and replacement procedures.
Internal block diagram and pin configuration for the CXD2834 tuner.
Details on connectors and protections for board B01A.
Details on connectors and protections for board B01A.
Circuit diagram for the IR/LED, RF, and light sensor board.
Circuit diagram for the IR/LED, light sensor, and proximity sensor board.
