To Next PageTo Next Page
Need help?Do you have a question about the Philips 42PFL6008S/12 and is the answer not in the manual?
General| Screen Size | 42 inches |
|---|---|
| Resolution | 1920 x 1080 pixels |
| Display Technology | LED |
| Smart TV | Yes |
| HDMI Ports | 4 |
| USB Ports | 3 |
| Wi-Fi | Yes |
| Ethernet | Yes |
| 3D | Yes |
| Refresh Rate | 400 Hz |
| Operating System | Android |
Details of all physical connections for the television set, including side and rear views.
Safety regulations for repair, including isolation transformer use, replacing safety components, and proper wiring.
Instructions on how to position the TV for servicing, emphasizing safety and ESD precautions.
Measuring signals and using test patterns via ComPair to determine defective parts.
Explanation of Service Default Mode (SDM), Service Alignment Mode (SAM), and Customer Service Mode (CSM).
Purpose of SDM for pre-defined settings, overriding SW protections, and activation/exit methods.
Mode for service technicians to perform alignments and set options.
Activating CSM for customer support to identify set status and diagnose complaints.
Explanation of error codes, their meaning, and how they are displayed.
Explanation of the error code buffer, how errors are logged, and when they are removed.
Methods for clearing the error buffer using SAM menu or automatic reset after 50+ hours.
Details on clearing the error buffer before repair and mechanisms of error detection.
Procedure for diagnosing faults using the blinking LED indicator.
Procedure for blinking LED errors, split into LAYER 1 and LAYER 2 errors.
Methods to activate CSM or SDM to show Layer 1 or Layer 2 errors via blinking LED.
Information on the set's protection mechanisms and how they function.
Types of software protections related to supplies and safety check mechanisms.
General tips and procedures for diagnosing and repairing faults.
Customer Service Mode details, including dumping CSM content to USB.
Details on input power, voltage splitting, and switching regulators.
Best way to find DC/DC converter failures by checking start-up sequence.
Guidelines for Uart logging, possible cases and interpretation of loggings.
Running background memory test, enabled via dial-in sequence, standby LED behavior.
Procedures for upgrading the TV's software, including automatic and manual methods.
Automatic upgrade in normal conditions when no major software problem.
Manual activation of the back-up application if the default upgrade application does not start.
Upgrading Standby software via USB stick using similar method to main software.
Conditions for electrical adjustments, including power supply voltage, isolation transformer, warm-up time, and probe usage.
Steps for setting correct options, storing them in SAM, and selecting the correct option numbers.
Software-based alignments, including white point adjustment.
Procedure for setting picture settings for white point alignment using LCD screens or color analyser.
Power supplies are black boxes; order new board for defective ones, replace fuses correctly.
Main block diagram of the chassis, showing functional blocks and connections.
Diagram showing power supply lines and voltage regulators for different components.
