EasyManua.ls Logo

Philips 42PFL6188K/12 User Manual

Philips 42PFL6188K/12
232 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Published by PvH/EL 1402 TV Quality Printed in the Netherlands Subject to modification EN 3122 785 19374
2014-Jan-10
2014
©
TP Vision Netherlands B.V.
All rights reserved. Specifications are subject to change without notice. Trademarks are the
property of Koninklijke Philips Electronics N.V. or their respective owners.
TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust
earlier supplies accordingly.
PHILIPS and the PHILIPS’ Shield Emblem are used under license from Koninklijke Philips Electronics N.V.
Colour Television Chassis
QFU1.2E
LA
Contents Page
1. Revision List 2
2. Technical Specs, Diversity, and Connections 2
3. Precautions, Notes, and Abbreviation List 7
4. Mechanical Instructions 11
5. Service Modes, Error Codes, and Fault Finding 20
6. Alignments 40
7. Circuit Descriptions 45
8. IC Data Sheets 47
9. Block Diagrams 49
10. Circuit Diagrams and PWB Layouts Drawing PWB
310431366124 SSB
59
99-100
310431366185 SSB 101
141-142
310431366186 SSB 143
183-184
C 310431366652 Amplifier panel 185
272217190763, 272217190764, 272217190766
Keyboard Control Module 187
282206502664, 282206502665, 820400159661
Wireless LAN USB module, light sensor, IR/LED195
282206502668, 282206502669 Wireless LAN USB
module, light sensor, IR/LED 195
272217190759, 272217190761 Sensor Module 202
310431366033 AmbiLight 203
310431366043 AmbiLight 205
310431366053 AmbiLight 207
310431366063 AmbiLight 209
310431366292 AmbiLight 213
310431366302 AmbiLight 215
310431366312 AmbiLight 217
310431366372 AmbiLight 219
11. Styling Sheets
6000 series 42"/47" 222
7000 series 42"/47" 223
8000 series 40"/46" 224
8000 Design series 46" 225
6000 series 55"/60" 226
7000 series 55" 227
8000 series 55" 228
8000 Design series 55" 229
8000 series 60" 230
9000 series 65" 231
9000 series 84" 232

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Philips 42PFL6188K/12 and is the answer not in the manual?

Philips 42PFL6188K/12 Specifications

General IconGeneral
Screen Size42 inches
Resolution1920 x 1080 pixels
Display TechnologyLCD
Smart TVYes
HDMI Ports4
USB Ports3
Audio Output20 W
Wi-FiYes
EthernetYes
Screen ShapeFlat
3DNo
USB RecordingYes
AmbilightYes
Refresh Rate200 Hz
BluetoothNo
Digital Signal Format SystemDVB-C, DVB-S2, DVB-T2
Weight14.5 kg

Summary

2. Technical Specs, Diversity, and Connections

2.1 Technical Specifications

Details on product specifications, CTN links, and online support.

2.3 Connections

Information on how to connect the television and its components.

2.3.1 Connections

3. Precautions, Notes, and Abbreviation List

3.1 Safety Instructions

Essential safety regulations and procedures for repair and post-repair.

3.2 Warnings

Important warnings related to product safety and operation.

4. Mechanical Instructions

4.3 Assy/Panel Removal

Procedure for removing the assembly or panel from the chassis.

4.4 Set Re-assembly

Instructions for re-assembling the set, emphasizing cable placement and EMC foams.

5. Service Modes, Error Codes, and Fault Finding

5.2 Service Modes

Overview of Service Default Mode (SDM), Service Alignment Mode (SAM), and Customer Service Mode (CSM).

5.2.1 Service Default Mode (SDM)

Purpose and activation of SDM for pre-defined settings and overriding SW protections.

5.2.2 Service Alignment Mode (SAM)

Explanation of the SAM mode for alignments and option settings.

5.2.3 Customer Service Mode (CSM)

Procedure for activating and using CSM for customer support and fault diagnosis.

5.3 Start-up

Diagrams illustrating the TV set's startup process and voltage states.

5.5 Error Codes

Explanation of error codes, buffer management, and clearing procedures.

5.5.1 Introduction

Explanation of the error code buffer and how errors are logged.

5.5.3 How to Clear the Error Buffer

Methods to clear the error buffer via SAM menu or automatic reset.

5.6 The Blinking LED Procedure

Procedure for interpreting LED blinking codes for error diagnosis.

5.7 Protections

Overview of software and hardware protections implemented in the set.

5.7.1 Software Protections

Types of software-related protections and fault conditions they address.

5.8 Fault Finding and Repair Tips

Tips and guidance for diagnosing and repairing common faults.

5.9 Software Upgrading

Methods for upgrading main and standby software via USB.

6. Alignments

6.1 General Alignment Conditions

Conditions and procedures for performing electrical adjustments, including power supply.

6.3 Software Alignments

Procedures for software-based alignments.

6.3.1 White Point

Procedure for white point alignment using LCD screens and color analyzers.

6.4 Option Settings

Configuration of various option settings and their importance.

6.5 Reset of Repaired SSB

Resetting NVM on a repaired SSB and setting service type/production code.

10. Circuit Diagrams and PWB Layouts

10.7 282206502664, 282206502665, 820400159661 Wireless LAN USB module, light sensor, IR/LED

Circuit diagrams for wireless LAN, USB, light sensor, and IR/LED components.

Related product manuals