Do you have a question about the Philips 42PFL6188K/12 and is the answer not in the manual?
Screen Size | 42 inches |
---|---|
Resolution | 1920 x 1080 pixels |
Display Technology | LCD |
Smart TV | Yes |
HDMI Ports | 4 |
USB Ports | 3 |
Audio Output | 20 W |
Wi-Fi | Yes |
Ethernet | Yes |
Screen Shape | Flat |
3D | No |
USB Recording | Yes |
Ambilight | Yes |
Refresh Rate | 200 Hz |
Bluetooth | No |
Digital Signal Format System | DVB-C, DVB-S2, DVB-T2 |
Weight | 14.5 kg |
Details on product specifications, CTN links, and online support.
Information on how to connect the television and its components.
Essential safety regulations and procedures for repair and post-repair.
Important warnings related to product safety and operation.
Procedure for removing the assembly or panel from the chassis.
Instructions for re-assembling the set, emphasizing cable placement and EMC foams.
Overview of Service Default Mode (SDM), Service Alignment Mode (SAM), and Customer Service Mode (CSM).
Purpose and activation of SDM for pre-defined settings and overriding SW protections.
Explanation of the SAM mode for alignments and option settings.
Procedure for activating and using CSM for customer support and fault diagnosis.
Diagrams illustrating the TV set's startup process and voltage states.
Explanation of error codes, buffer management, and clearing procedures.
Explanation of the error code buffer and how errors are logged.
Methods to clear the error buffer via SAM menu or automatic reset.
Procedure for interpreting LED blinking codes for error diagnosis.
Overview of software and hardware protections implemented in the set.
Types of software-related protections and fault conditions they address.
Tips and guidance for diagnosing and repairing common faults.
Methods for upgrading main and standby software via USB.
Conditions and procedures for performing electrical adjustments, including power supply.
Procedures for software-based alignments.
Procedure for white point alignment using LCD screens and color analyzers.
Configuration of various option settings and their importance.
Resetting NVM on a repaired SSB and setting service type/production code.
Circuit diagrams for wireless LAN, USB, light sensor, and IR/LED components.