Smart sound settings
Use the [Smart sound] experience menu to
access frequently used sound settings.
1. While watching TV, press .
2. Select [Smart sound], then select one of
the following settings:
[Personal]: Sets the TV to your
personal preferences set in the [Sound]
menus in [Setup].
[Standard]: Adjusts sound settings to
suit most environments and types of
audio.
[News]: Applies sound settings ideally
suited for spoken audio, such as the
news.
[Movie]: Applies sound settings ideally
suited for movies.
[Game]: Ideal settings for gaming.
[Drama]: Applies sound settings ideally
suited for drama.
[Sports]: Applies sound settings ideally
suited for sports.
3. Press OK to confirm your choice.
4. Press to exit.
More sound settings
NonPublis h
1. Press .
2. Select [Setup] > [TV settings] > [Sound],
then press OK.
3. Select a setting to adjust:
[Smart sound]: Accesses pre-defined
smart sound settings.
[Reset]: Resets to factory default
settings.
[Bass]: Adjusts the bass level.
[Treble]: Adjusts the treble level.
[Surround]: Enables spatial sound.
[Headphones volume]: Adjusts
headphone volume.
[Auto volume leveling]: Automatically
reduces sudden volume changes, for
example, when switching channels.
[Balance]: Adjusts the balance of the
left and right speakers to best suit your
listening position.
Reset to factory settings
NonPublis h
Resetting your TV to factory settings
restores default picture and sound settings.
Channel installation settings remain the
same.
1. While watching TV, press .
2. Select [Setup] > [TV settings] > [Factory
settings], then press OK.
TV settings are reset back to the factory
default.
Start a TV demo
NonPublis h
Start a demo to find out more about your
TV's features.
Note: Demos are not supported on MHEG
channels.
1. While watching TV, press .
2. Select [Setup] > [Watch demos], then
press OK.
3. Select a demo, then press OK.
4. Press to exit the demo.
Change channel settings
Reorder channels
NonPublis h
After installation, you may want to reorder
the channel list to suit your preference.
1. While watching TV, press .
2. Select [Channel list], then press OK.
3. In the channel list, press .
4. Select [Reorder], then press OK.
5. Select the channel to reorder, move it to
the desired location, then press OK.
6. Select [Insert] to insert the channel into
the desired location, [Swap] to swap
location with another channel or [Cancel] to
cancel the reorder.
7. Press OK to activate.
Rename channels
NonPublis h
After installation, you may want to rename
channels to suit your preference.
1. While watching TV, press .
2. Select [Channel list], then press OK.
To Next Page
Loading...
