To Next PageTo Next Page
Need help?Do you have a question about the Philips 47PFL4606H/12 and is the answer not in the manual?
General| Screen Size | 47 inches |
|---|---|
| Display Technology | LCD |
| HDMI Ports | 4 |
| USB Ports | 2 |
| Brightness | 400 cd/m² |
| USB 2.0 Ports Quantity | 2 |
| Component Video (YPbPr/YCbCr) in | 1 |
| SCART Ports Quantity | 1 |
| Common Interface (CI) | Yes |
| RMS Rated Power | 20 W |
| Teletext Function | Yes |
| Teletext | 1000 pages |
| Resolution | 1920 x 1080 pixels |
| Audio Output | 20W |
| Screen Format Adjustments | 16:9 |
| Supported Video Modes | 1080p |
Crucial safety regulations and precautions to be followed during repair and operation.
Important warnings regarding ESD, high voltage, and tool usage during service procedures.
Detailed instructions for disassembling the TV, including rear cover and panel removal procedures.
Procedure for removing the SSB, including connector handling and screw management.
Instructions for removing the PSU, emphasizing screw retention and cable disconnection.
Explanation of different service modes (SDM, SAM, CSM, ComPair) and their features for repair and alignment.
Information on ComPair, a diagnostic tool, including its description, connection, and ordering codes.
Instructions for upgrading the TV's main software via USB, including preparation and procedure.
Information on error codes, their meaning, and how they are displayed in the service menu or via blinking LED.
Specific information about detected error codes, their meanings, and possible causes.
General tips for fault finding, component checks, and ensuring correct options are set.
Instructions for performing software alignments via SAM mode, including white point and signal tests.
Explanation of option codes and their role in configuring the microprocessor for various ICs.
Procedure to set the display option code via a key sequence, crucial after panel or SSB exchange.
Important procedures for resetting the NVM on a repaired SSB and setting service type and production code.
Details on the Power Supply Unit, including output voltages and diversity in screen sizes.
Information on the PSU, including fuse checks, fuse replacement, and output voltages.
Detailed descriptions of various circuits, including System power, Tuner, Core power, and Digital/Analogue power.
Internal block diagram of the MT5395, showing its main functions and interfaces.
Detailed pin configuration for the MT5395LUGJ IC, listing pin names and functions.
Block diagram of the MAX9668ETP, showing its DACs and interface for display control.
Pinout details for the MAX9668ETP TCON chip, essential for display signal connections.
Block diagram of the TPS65192RHDR, detailing its level shift and gate shaping functions.
Pinout details for the TPS65192RHDR TCON chip, crucial for panel voltage regulation.
Block diagram of the MAX17113ETL, showing its DC/DC conversion capabilities for TCON power.
Pinout details for the MAX17113ETL TCON chip, important for power management.
Block diagram of the G5172R41D, detailing its voltage regulation and protection features.
Pinout details for the G5172R41D IC, essential for power supply circuit design.
Overall block diagram of the TV system, showing major functional blocks and connections.
Circuit diagram and PWB layout for the Power Supply Unit (PSU) adapter for the 32-inch model.
Circuit diagram and PWB layout for the PSU for 37", 42", and 47" models.
Circuit diagram for the SSB (Small Signal Board) - Power-1 section.
Circuit diagram for HDMI input connections, including EDID EEPROM and ESD protection.
Circuit diagram for the audio amplifier and headphone output section.
Circuit diagram for the LVDS output, including control interface and bright adjust.
Circuit diagram for the TCON chip, showing its interface with the main board and display panel.
