Digital out offset (Only available when Digital out
delay set to On)
Settings > Sound > Advanced > Digital out
offset.
If you cannot set a delay on the Home Theatre
System, you can set the display to sync the sound.
You can set an offset that compensates for the time
necessary for the Home Theatre System to process
the sound of the picture. You can set the value in
steps of 5ms. Maximum setting is 60ms.
Dolby Atmos Notification
Settings > Sound > Dolby Atmos notification.
Switch On or Off the Dolby Atmos notification when
Dolby Atmos content begins to play on your display.
12.3
Ambilight Settings
For more information, in Help, press the colour
key Keywords and look up Ambilight for more
information.
12.4
Eco Settings
Set screen off to save energy consumption
Quick Menu > Frequent Settings > Screen off.
Select Screen off, the display screen is switched off,
to switch the screen back on, press any key on the
remote control.
Set to reduce eye strain
Quick Menu > Frequent Settings > Eye care.
Switch on to automatically reduce eye strain under
different ambient light conditions.
Set the switch off timer
Settings > Eco settings > Switch off timer.
Press the arrows (up) or (down) to adjust the
value. The value 0 (Off) deactivates the automatic
switch off.
Select Switch off timer, the display switches off
automatically to save energy.
* The display switches off if receiving signals but you
don't press a key on the remote control during a 4
hour period.
* The display switches off if not receiving signals nor a
remote control command for 10 minutes.
* If you use the device as a monitor or use a digital
receiver to watch programme (a Set-Top Box - STB)
and you do not use the remote control of the display,
you should deactivate this automatic switch off, to set
the value to 0.
12.5
General Settings
USB Keyboard Settings
Set the keyboard layout for installed USB keyboard
Settings > General settings > USB keyboard
settings.
Connect the USB keyboard to one of the USB
connections on this display. When the display
detects the keyboard for the first time, you can select
your keyboard lay-out and test your selection.
Home or Shop
Select the location of your display
Settings > General settings > Location.
Select Shop, the picture style is switched back
to Vivid, and can adjust shop settings.
Shop mode is for in-store promotion.
Shop Setup
Adjust shop settings
Settings > General settings > Shop setup.
If the display is set to Shop, you can set the
availablility of a specific demo for in store use.
Adjust Picture and audio
Settings > General settings > Shop setup >
Picture and audio.
Select Optimized for shop or custom for picture and
audio settings.
Demo Me autostart
Settings > General settings > Shop setup >
Demo Me autostart.
Turn On/Off the Demo Me autostart.
37
To Next Page
Loading...
