Why can I see picture but no sound on my Philips 49BDL3005X?
If you can see the picture but no sound is heard on your Philips Monitor, ensure that both video and sound input cables are correctly connected. Adjust the volume by pressing the appropriate button. Also, check if the mute function is on and switch it off. Finally, ensure that external speakers are connected and the volume is set to an audible level.
How to fix no picture on my Philips 49BDL3005X?
If no picture is displayed on your Philips Monitor, first, ensure the power cord is properly plugged in and the main power switch on the back of the display is switched on. Also, verify that the selected input has a signal connection to the display. Finally, check if the display is in standby mode.
How to adjust Philips 49BDL3005X Monitor screen size to fill the display?
If the display image doesn’t fill up the full size of the screen on your Philips Monitor, use the Zoom mode or Custom zoom function in the Screen menu to fine-tune display geometry and time frequency parameter.
What to do if picture is distorted with abnormal patterns on Philips Monitor?
If the picture on your Philips Monitor is distorted with abnormal patterns, ensure the signal cable is firmly attached. Also, check the video signal source to ensure it is within the display's capabilities, verifying its specifications.
Why is there interference or audible noise on my Philips Monitor?
If you're experiencing interference or audible noise with your Philips Monitor, this may be caused by surrounding electrical appliances or fluorescent lights. Try moving the display to another location to see if the interference is reduced.
How to fix abnormal color on Philips Monitor?
If the color on your Philips Monitor appears abnormal, ensure that the signal cable is firmly attached to the back of the display.
Why can I hear sound but no picture on my Philips 49BDL3005X Monitor?
If you can hear sound but there is no picture on your Philips Monitor, make sure that both video inputs and sound inputs are correctly connected.
How to prevent after-images on my Philips 49BDL3005X?
If after-images are visible on your Philips Monitor after it's powered off, this is often due to a still picture being displayed for an extended period. To prevent this, avoid displaying still images for prolonged durations, as it can cause a permanent after-image to remain on the display.
Why some pixels do not light up on my Philips 49BDL3005X Monitor?
This Philips monitor is manufactured using an extremely high level of precision technology; however, sometimes some pixels of the display may not display. This is not a malfunction.
General| Pixel pitch | 0.56 x 0.56 mm |
|---|---|
| Response time | 8 ms |
| Display diagonal | 48.5 \ |
| Display brightness | 450 cd/m² |
| Display technology | LED |
| Native aspect ratio | 16:9 |
| LED backlighting type | Direct-LED |
| Contrast ratio (dynamic) | 500000:1 |
| Display number of colors | 1.073 billion colors |
| Display diagonal (metric) | 123.2 cm |
| Quick start guide | Yes |
| Maximum refresh rate | 60 Hz |
| DVI-I ports quantity | 1 |
| Orientation | Horizontal/Vertical |
| Product color | Black |
| Product design | Digital signage flat panel |
| Bezel width (top) | 2.35 mm |
| Placement supported | Indoor |
| Bezel width (bottom) | 1.25 mm |
| Panel mounting interface | 400 x 400 mm |
| Purpose | Universal |
| Number of OSD languages | 12 |
| On Screen Display (OSD) languages | ARA, CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, POL, RUS, TUR |
| Operating altitude | 0 - 3000 m |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 110 W |
| Sustainability certificates | ENERGY STAR |
| RMS rated power | 20 W |
| Cables included | AC, DVI |
| Certification | CE, FCC, Class B, UL/cUL, CB, GOST, EPEAT |
| Harmonized System (HS) code | 85285210 |
Weight and Dimensions| Depth | 103.8 mm |
|---|---|
| Width | 1077.6 mm |
| Height | 607.8 mm |
| Weight | 21600 g |
Essential safety guidelines and maintenance tips for the display.
Important notes and warnings before installing the display.
Details of the buttons and indicators on the control panel.
Explanation of the functions for each remote control button.
How to connect DVD, VCR, or VCD players via video inputs.
How to connect a PC using VGA and DVI video inputs.
Connecting multiple displays for serial control.
Connecting displays using DVI and DisplayPort for video.
Instructions for connecting the display to a home network.
How to choose and watch the connected video input.
How to play media files stored on a USB device.
Options for playing music, movie, and photo files.
Detailed options for adjusting picture quality settings.
Options for adjusting sound style, bass, treble, and volume.
Configuration for creating video walls using multiple displays.
Settings for network assignment and type.
Adjusting language, monitor ID, eco mode, and clock.
Programming scheduled activation times and input sources.
Acceptable levels for pixel defects during warranty period.
Instructions for safely cleaning the display panel and cabinet.
To Next Page