Philips 49BDL3005X - Audio and Display Configuration; Sound Settings Adjustment; Tiling and Video Wall Setup

BDL4988XC/49BDL3005X
23
• {VZoom}:Expandtheverticalsizeofimageonly.
Note:Zoom,HZoomandVZoomareavailableonlywhenthePicture
formatsettingissettoCustomZoom.
Seepage18forthedescriptionsabout
Picture format
.
HDMI input range
ColorrangesofHDMIvideoformat
• {Auto}:AutomaticcolorrangeofHDMIvideoformat.
• {Limit}:LimitedrangeofHDMIvideoformat.
• {Full}:FullrangeofHDMIvideoformat.
Picture reset
Resetallyourpicturesettingstothefactorydefaults.
5.1.2. Sound
Sound style
Bass
Treble
Balance
Volume
Minimum volume
Maximum volume
Surround mode
Audio out (line out)
Advanced
Sync. Volume
Sound reset
Picture
Sound
Tiling
Network
General settings
Advanced
Help
Sound style
Accesspredenedsoundsettings.
Bass
Adjusttoincreaseordecreaselower-pitchedsounds.
Treble
Adjusttoincreaseordecreasehigher-pitchedsounds.
Balance
Adjusttoemphasizeleftorrightaudiooutputbalance.
Volume
Adjusttoincreaseordecreasethevolume.
Minimum volume
Settheminimumvolume.
Maximum volume
Setthemaximumvolume.
Surround mode
Setsurroundeffectforaudioperformance.
Audio out (line out)
Adjustaudiooutputvolume.
Advanced
Accessadvancedsettingstoenhanceyouraudioexperience.
• {Auto volume leveling}:Enablethereductionofsuddenvolume
changes.
• {Speaker settings}:TurnOnorOfftheinternalspeaker.
• {Clear sound}:Enhancesoundquality.
• {Audio out format}:Selectthetypeofaudiooutputthrough
thedigitalaudiooutputconnector.(HDMIonly)
• {Audio out delay}:Automaticallysynchronizetheimageofthis
displaytotheaudiofromaconnectedhometheatre.
• {Audio out offset}:Adjustthesettingforaudiooutputdelay.This
optionisavailableif{Audio out delay}isswitchedon.
Sync. Volume
EnableordisabletheSync.Volumefunction.Set{On}tosynchronizethe
volumeofinternalspeakerandline-out.Set{Off}toadjustthevolume
ofinternalspeakerandline-out,respectively.
Sound reset
Resettothedefaultsetting.
Card OPS audio
SetOPSaudiooutputformat.
Theoptionsare:{Auto},{Analog},{Digital}
NOTE: WhenCardOPSsourceisselected,thisitemwillappearon
theOSDmenu.
5.1.3. Tiling
Enable
H monitors
V monitors
Position
Frame comp.
Frame comp. H
Frame comp. V
Switch on delay
RS232-Routing
Auto ID
Picture
Sound
Tiling
Network
General settings
Advanced
Help
Createasinglelarge-screenmatrix(videowall)thatconsistsofupto
100setsofdisplay(up to 10 sets in vertical side and 10 sets on the
horizontal side).
Enable
EnableordisabletheTilingfunction.If{On}isselected,thedisplaywill
applythesettingsin{H monitors},{V monitors},{Position},and{Frame
comp.}.
H monitors
Sethowmanydisplaysinhorizontalside.
V monitors
Sethowmanydisplaysinverticalside.
Position
Setthepositionofthisdisplayinthescreenmatrix.