4-1 PL11.9-A_DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts and the CBA in order to gain access to
items to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
2. Disassembly Method
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
e.g. 2(S-2) = two Screws of (S-2),
2(L-2) = two Locking Tabs of (L-2)
(5) Refer to the following "Reference Notes in the
Table."
Step/
Loc.
No.
Part
Fig.
No.
Removal Note
[1]
Stand
Assembly
D1 4(S-1) ---
[2]
Rear
Cabinet
D1 16(S-2), 4(S-3), 2(S-4) ---
[3] Speaker
D2
D5
CN3801 ---
[4]
IR Sensor
CBA Unit
D2
D5
CN3102, CN4051,
Shield Plate
---
[5]
Function
CBA Unit
D2
D5
Function Button,
Knob Frame
---
[6]
Power
Supply
CBA
D3
D5
11(S-5), CN1601,
CN1801, CN1913,
CN1914
---
[1] Stand
Assembly
[2] Rear Cabinet
[6] Power Supply
CBA
[3] Speaker
[10] Stand
Bracket
[11] PCB Holder
(D), (U)
[12] Wall Mount
Bracket
[7] Digital Main
CBA Unit
[8] FRC CBA
Unit
[9] Jack PCB
Holder
[13] LCD Module
Assembly
[14] Front Cabinet
[4] IR Sensor
CBA Unit
[5] Function
CBA Unit
[7]
Digital Main
CBA Unit
D3
D5
6(S-6), CN3101,
CN3901, Wireless
LAN Adaptor,
Jack Holder A,
Jack Holder B,
Shield Box
---
[8]
FRC CBA
Unit
D3
D5
4(S-7), CN5003,
CN5004,
FRC Shield Box
---
[9]
Jack PCB
Holder
D4 6(S-8) ---
[10]
Stand
Bracket
D4
2(S-9), 8(S-10),
4(S-11), CL1601,
AC Inlet Holder
---
[11]
PCB Holder
(D), (U)
D4 6(S-12) ---
[12]
Wall Mount
Bracket
D4 4(S-13) ---
[13]
LCD
Module
Assembly
D4 8(S-14), 2(S-15) ---
[14]
Front
Cabinet
D4 --------------- ---
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
Step/
Loc.
No.
Part
Fig.
No.
Removal Note