Ideal TV setting
Set the TV Picture format to Unscaled for the sharpest picture
quality. While watching TV, press o, select Picture format and
select Unscaled.
For a list of supported resolutions see Help > Specifications >
Display resolutions.
Decoder
Use a scart cable to connect a decoder that decodes analogue
antenna channels. Use the EXT1 connector on the back of the TV.
You have to assign the TV channel as a channel to be decoded.
Then assign the connection where the decoder is connected.
To assign this TV channel, press h > Setup > Channel settings >
Decoder. Select Channel to set up the channel that you want to
decode. Select Status to set the connection you use for the
decoder.
To Next Page
Loading...
