To set the TV clock manually (if available)…
1 - Press
, select All Settings and press OK.
2 - Select Region and Language and
select Clock > Auto Clock Mode and press OK.
3 - Select Manual and press OK.
4 - Press
(left) and select Date or Time and
press OK.
5 - Press
(up) or
(down) to adjust the value.
6 - Press
(left) to go back one step.
Remote Control Keyboard
To set the keyboard layout to Azerty…
1 - Press
, select All Settings and press OK.
2 - Select Region and Language and
press
(right) to enter the menu.
3 - Select Remote Control Keyboard and
press OK.
4 - Select Azerty or Qwerty and press OK.
5 - Press
(left) repeatedly if necessary, to close
the menu.
23.7
Universal Access
Switch On
With Universal Access switched on, the TV is
prepared for use for the deaf, hard of hearing, blind or
partially sighted people.
Switch on
If you did not switch on Universal Access during the
installation, you can still switch it on in Universal
Access menu.
To switch on Accessibility…
1 - Press
, select All Settings and press OK.
2 - Select Universal Access and press
(right) to
enter the menu.
3 - Select Universal Access one step further.
4 - Select On and press OK.
5 - Press
(left) repeatedly if necessary, to close
the menu.
Hard of Hearing
Some digital TV channels broadcast special audio and
subtitles adapted for the hard of hearing or deaf
people. With Hearing impaired switched on, the TV
automatically switches to the adapted audio and
subtitles, if available. Before you can switch
on Hearing impaired, you have to switch
on Universal Access.
To switch on Hearing impaired…
1 - Press
, select All Settings and press OK.
2 - Select Universal Access and press
(right) to
enter the menu.
3 - Select Hearing impaired and press
(right) to
enter the menu.
4 - Select On and press OK.
5 - Press
(left) repeatedly if necessary, to close
the menu.
To switch on Hearing impaired while watching TV...
1 - While watching a TV channel, press
OPTIONS,
select Universal Access and press OK.
2 - Select Hearing impaired, and select On.
To check whether a hearing impaired audio language
is available, press
OPTIONS, select Audio
Language and look for an audio language marked
with a
.
If Accessibility does not appear in the Options menu,
switch on Universal Access in setup menu.
For more information, in Help, select Keywords and
look up Universal Access .
Audio Description
Switch On
Digital TV channels can broadcast special audio
commentary describing what is happening on
screen.
To be able to set the visually impaired audio and
effects, you have to switch on Audio
Description first.
Also, before you can switch on Audio Description,
you have to switch on Universal Access in setup
menu.
With Audio Description, a narrator's commentary is
added to the normal audio.
To switch on the commentary (if available)…
To switch on Audio Description…
1 - Press
, select All Settings and press OK.
2 - Select Universal Access and press
(right) to
enter the menu.
3 - Select Audio Description and press
(right) to
enter the menu.
4 - Select Audio Description one step further
5 - Select On and press OK.
6 - Press
(left) repeatedly if necessary, to close
the menu.
To switch on Audio Description while watching TV...
1 - While watching a TV channel, press
OPTIONS,
select Universal Access and press OK.
2 - Select Audio Description, and select On.
You can check if an audio commentary is available.
79
To Next Page
Loading...
