Getting started 1
1 • Getting started
Read the safety instructions in the "Precautions" section
before use (see page 65).
To use your phone, you must insert a valid SIM card
supplied by your GSM operator or retailer. The SIM
card contains your subscription, your mobile number,
and memory in which you can store phone numbers
and messages.
1.
Slide the back cover of the phone to remove it.
2.
Insert the SIM card in its slot making sure that
the clipped corner is in the correct place. Push
the clip holder until it maintains the card.
3.
Insert the battery: place one edge against one
edge of the phone and press until it clips (make
sure connectors are facing each other).
4.
Replace the back cover by sliding it until it stops.
Remove the protective film covering the screen
before using the phone.
Insert the SIM card and the
battery
To Next Page
Loading...
