Philips 9000 series - Replacing the Cartridge of the Smartclean System

English
Replacing the cartridge of the SmartClean
system
Replace the cleaning cartridge when the
replacement symbol ashes orange or when you
are no longer satised with the cleaning result. If
you clean the shaver in the SmartClean system
once a week, the SmartClean cartridge lasts
approximately three months.
1 While holding the SmartClean system with one
hand, press the button on the side of the
SmartClean system and lift the top part of the
SmartClean system.
2 Remove the cleaning cartridge from the
SmartClean system and pour out any remaining
cleaning uid.
You can safely pour the cleaning uid down the
sink.
3 Discard the empty cleaning cartridge.
4 Unpack the new cleaning cartridge and pull o
the seal.
5 Place the cleaning cartridge in the SmartClean
system.
6 While holding the SmartClean system with
one hand, gently push the top part of the
SmartClean system back down (‘click’).
42
s8960_27_en_a6_cs6_1116.indd 42 2018/11/16 17:30