Philips AC0820/10 - Operating the Air Purifier; Air Quality Indicator and Modes; Installation and Power Connection; Basic Operation: Powering On;Off

5EN
English
3 Using the air purifier
Understanding the air quality light
The color of air quality light corresponds to the ambient air quality�
The brightness of air quality light reects the current running mode�
PM2�5 level Air quality light color Air quality level
≤12 Blue Good
13-35 Blue-purple Fair
36-55 Purple-red Poor
>55 Red Very poor
Installing the lter
Remove all packaging of the lter before use�
Note: Make sure the air purier is unplugged from the electrical outlet before installing the
lter�
1 Rotate the base anti-clockwise to remove it from the appliance (g c)�
2 Pull the lter out from the appliance (g d)�
3 Remove all packaging materials of the air purication lter (g e)�
4 Put the lter back into the appliance (g f)�
5 Reattach the base and rotate it clockwise to fasten the base (g g)�
Connecting power
Note: Risk of electric shock! When you unplug the AC power cord, always pull the plug from
the socket� Never pull the cord (g h)�
Connect the power adapter to:
• First, the power socket on the appliance�
• Then, the wall outlet�
Turning on and o
Note: For optimum purication performance, close doors and windows�
1 Press the power button on the back of the air purier to switch on�
» The air purier operates in the auto mode by default�
2 Press the power button again to switch o the air purier�